Overview
Product Benefits
- Improves adhesion on timber decking
- Designed for use before Sikaflex®-290 DC or Sikaflex®-298
- Suitable for teak, mahogany, Oregon pine and polyester GRP
Areas of Application
Used to improve adhesion on teak, mahogany, Oregon pine and polyester-based GRP. The product is intended for experienced professional users and should be tested under actual substrate and application conditions.
Application
Surface preparation
Surfaces must be clean, dry and free from grease, oil, dust and contaminants. Scuffing and cleaning may be used where needed to improve adhesion.
Application
Apply one thin but covering coat with a clean, dry brush, fully covering the teak without excess. Leave at least 60 minutes before sealing or bonding. The preferred application and surface temperature is 15–25 °C. Reseal the container immediately after use.
Spray application
Contact Sika Industry Technical Service before spray application or when selecting spray equipment.
Product page: Sika® Primer-290 DC
Suomi







